The factory Geely Emgrand GL front lights is developed with halogen bulb. As all understand, the illumination of halogen bulb is as well dark to drive. Higgins decides to upgrade his headlight with projector. We helped him make out an ideal tuning prepare for his headlight.
Open the car, took off the bump to yank the headlight assemble. Made a protective finishing on the cover of the housing and afterwards put it into the oven for concerning ten minutes. That can shield the headlight cover and obtain the front lights out quickly. Removed OEM fronts lights that were resealed using silicone, it is hard to do it. After open them up, remove the OEM projector. Set up Aozoom bi xenon projector right into the housing. Due to the fact that the hid retrofit kit aftermarket projector is not the comparable to the factory one, we require to eliminate the exterior part to fit the housing. When the installment were all done, test the light beam pattern to comply to the standard. After finishing the light examination, fix the housing with chilly gule to stay clear of leak. And afterwards heat the adhesive in a consistent temperature. The front lights housing can stick to the base carefully, and also installed the screws at the same time. The tuning is all done, the cutoff is intense than Higgins's picture. He was pleased to the customized front lights. So that he can drive on road to see a long distance, and with a large variation to prevent an unnecessary mishap.
0 评论
写评论。 |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2019
Categories |